OTHER
PRO-GRESS Temp Meter
-
SENSOR ADAPTER for TYPE-G -> M32X1.5
Digital temp meter (meter body no longer in production)
SUPER7
| Model | Year | Oil Temp Sensor | Water Temp Sensor | ||
|---|---|---|---|---|---|
| Type | Mounting Position | Type | Mounting Position | ||
| SUPER7 (VAUXHALL)*3 | G *1 | Top of Oil Element | C | Replace STD Sensor *6 | |
| SUPER7 (BDR)*3 | – | Not Applicable | C | Replace STD Sensor *6 | |
DUCATI
| Model | Year | Oil Temp Sensor | Water Temp Sensor | ||
|---|---|---|---|---|---|
| Type | Mounting Position | Type | Mounting Position | ||
| F1/ 3 | G *1 | Oil Pan Drain Plug | |||
| 888/ 851 | G *1 | Oil Pan Drain Plug | |||
| 900/ 750/ 400SS | G *1 | Oil Pan Drain Plug | |||
| M900/ 750/ 400 | G *1 | Oil Pan Drain Plug | |||
| SS900/ 750/ 400 | G *1 | Oil Pan Drain Plug | |||
| ST4 | G *1 *5 | Oil Pan Drain Plug | C *2 | Radiator Hose (Adaptor Required) |
|
| S4 | G *1 *5 | Oil Pan Drain Plug | C *2 | Radiator Hose (Adaptor Required) |
|
| 996/ 916/ 748 | G *1 *5 | Oil Pan Drain Plug | C *2 | Radiator Hose (Adaptor Required) |
|
BMW
| Model | Year | Oil Temp Sensor | Water Temp Sensor | ||
|---|---|---|---|---|---|
| Type | Mounting Position | Type | Mounting Position | ||
| R1100S | 03 | B | Drain Plug | ||
| S1000RR | B | Oil Pan Drain Plug | – | Not Applicable | |
| F700GS | 14 | G | Back of Cylinder Head (with STD Washer) | C | Radiator Hose (Adaptor Required) |
TRIUMPH
| Model | Year | Oil Temp Sensor | Water Temp Sensor | ||
|---|---|---|---|---|---|
| Type | Mounting Position | Type | Mounting Position | ||
| DAYTONA675 | D | Oil Pan Drain Plug | C *2 | Radiator Hose (Adaptor Required) |
|
*1 Require Sensor Adaptor
*2 Require Water Temp Sensor Adaptor
*3 If the cord supplied with the digital thermometer is less than 2.3 m, purchase a joint cord (sold separately).
Sensor cable for PRO-GRESS 1.0m
Joint cord for digital tempmeter / L=2.3 m
*4 E Sensor (Oil Galley on Lower Right Crankcase) is recommended for installing. G Sensor (Oil Drain Plug) also possible to install.
*5 The Oil Temp Sensor can also be installed on the strainer blind cap only on vehicles where the strainer is dependent on the blind cap using the sensor conversion adaptor M32 x 1.5 415-621-0200 too. (In this case the strainer must be cancelled.)It cannot be installed on Testastretta engines such as DUCATI 996R/998R. For other vehicles, please check the thread diameter and pitch and consider other sensors.
*6 Removing the STD sensor may cause the fan behind the radiator to stop functioning in some vehicles.