GROM/MSX125 Carburetor Conversion Kit & YD-MJN Carburetor
GROM CABRETOR KIT
Carburetor conversion kit was developed to bring real engine performance and potential of GROM/MSX125. It gives not only the power but also the possibility of tuning.
GROM/MSX125 Carburetor Conversion Kit
Installation is easy. Just remove STD throttle body and air cleaner box, and then install Yoshimura YD-MJN Carburetor and the Carburetor conversion kit.
Note: STD fuel pump, ECU, wiring harness are used. Also STD throttle switches (engine starter, kill switch etc.) and STD meter panel (fuel gauge, rev & speed indication etc.) are possible to use.
Both YD-MJN24 and YD-MJN28 carburetors are applicable. Using spacer in the kit, carburetor can be mounted either left or right side.
- YD-MJN24 is recommended to use when cylinder & cylinder head are STD.
- YD-MJN28 is recommended to use when cylinder head is modified or porting is done.
Note
The setting of the YD-MJN Carburetors are done with Yoshimura R-77S Exhaust system and Yoshimura ST-1 Camshaft.
Kit contents
1. TPS Unit & Throttle Cables
The sensor of TPS Unit sends signal of throttle position to ECU, and it makes possible to get best ignition timing of STD ECU. To use STD throttle holder, necessary items such as Throttle Cables or Blind Plug are included.
2.Ignition module
It eliminates FI Error warning.
Fuel gauge, engine rev and speed at STD meter panel are functional.
3.Fuel cock
The fuel cock adjusts fuel supply.
4.Shroud bracket
Bracket is used when STD air cleaner box is removed and hold shroud in the same position.
It makes possible to mount Universal Oil Catch Tank Kit (optional item).
Note
It is recommended to change final ratio.
STD 15:34 >>> Yoshimura 16:34
Recommended item: SUNSTAR Drive sprocket (Part No. 103-16) [Note: STD drive sprocket plate has to be used.]
Description | Application | Part No. |
---|---|---|
GROM/MSX125 Carburetor Conversion Kit | GROM/MSX125 (-2014) | 792C40A-0000 |
GROM/MSX125 Carburetor
YD-MJN24/28 Carburetor Set for GROM/MSX125
- YD-MJN24: Part No. 792-40A-4110
- YD-MJN28: Part No. 792-40A-8110
YD-MJN24/28 Carburetor for GROM/MSX125 (without manifold)
- YD-MJN24: Part No. 702-40A-4110
- YD-MJN28: Part No. 702-40A-8110